On Tue, 16 Nov 2004 11:18:27 -0500 (EST), you wrote:
>Ceiling too?
>
>Yeesh. Looks like I'll be renting a sheetrock lift to install that if
>so... :-)
Get a copy of the installation instructions for installing the fire
gypsum board - the details such as nail spacing is important for
meeting the fire requirements. You will also need to make sure there
is plenty of wood at the joints - join sheets on a nog or stud,
otherwise the fire will go through the gap.
You sure will be wanting the lifter, and a strong helper. the stuff
is HEAVY
Geoff
(just the thesis to go then I can call myself a fire engineer...)
|