shop-talk
[Top] [All Lists]

Re: preping fiberglass

To: shop-talk@autox.team.net
Subject: Re: preping fiberglass
From: Mike Lee - Team Banana Racing <mikel@ichips.intel.com>
Date: Fri, 15 Feb 2002 12:56:49 -0800
>From my experience with some fiberglass motorcycle bodywork...  When scuffing 
>up
the fiberglass, don't scuff so hard that the ends of the fiberglass are exposed;
that caused pinhole problems in the paint for me.  Krylon didn't work very well,
as rocks easily chipped it off.  It was also not solvent (gas) or abrasion 
resistant
in the slightest....

///  unsubscribe/change address requests to majordomo@autox.team.net  or try
///  http://www.team.net/mailman/listinfo
///  Archives at http://www.team.net/archive/shop-talk


<Prev in Thread] Current Thread [Next in Thread>