shop-talk
[Top] [All Lists]

Re: no start

To: <JNiolon@uss.com>, <shop-talk@autox.team.net>
Subject: Re: no start
From: "Keith Turk" <kturk@ala.net>
Date: Wed, 23 Jan 2002 09:28:17 -0600
I'm liking the Ground answer a lot.... simple easy clean and neat and
honestly I just solved the same problem on my Son's truck.... Make sure
it's got a good clean ground.

K
----------
> From: JNiolon@uss.com
> To: shop-talk@autox.team.net
> Subject: no start
> Date: Wednesday, January 23, 2002 9:03 AM
> 
> 
> Steve,
> 
> I had a similar problem...  and yes is the answer. The corrosion has
worked
> it's way under the insulation and several inches of the cable were
corroded
> to a beautiful shade of blue gray from the outside wraps to the core. 
But,
> it was not visible from the outside...
> 
> The insulation was intact and a nice piece of shrink-wrap tubing covered
> the bare wire at the connector.  Another place to look is at the ground
> connection to the frame and block.  These connections can corrode under
the
> connector or paint and never be noticed.  If you clean your engine
> compartment with any frequency, you'll remove the surface corrosion but
> leave what is growing unchecked under the connector.
> 
> Look at all your ground connections and the condition of cables under the
> insulation...  it might also help to install a ground cable from the
frame
> to one of the bolts that hold the starter in place..
> 
> john

///  unsubscribe/change address requests to majordomo@autox.team.net  or try
///  http://www.team.net/mailman/listinfo
///  Archives at http://www.team.net/archive/shop-talk


<Prev in Thread] Current Thread [Next in Thread>