shop-talk
[Top] [All Lists]

Re: TV Antenna Installation

To: Shop Talk List <shop-talk@autox.team.net>
Subject: Re: TV Antenna Installation
From: Erik Quackenbush <erik@midwestfilter.com>
Date: Fri, 13 Jul 2001 03:58:16 -0500
At 01:18 PM 7/12/2001 -0400, Rush wrote:

>Don't use amplifiers!

If you're in a fringe area putting a high quality antenna mounted amplifier 
can improve things. The amplifier should be between the antenna and the 
long coax run- not in the house. You will need a weatherproof amplifier 
designed for this application. You can run a separate twisted pair to power 
the amplifier or power it off the coax cable.

With coax power the transformer is in the house at the other end of the 
long cable run. It injects DC into the cable but uses a DC block (usually 
just a capacitor) to prevent the DC from getting to any TVs or other video 
equipment. Coax power is convenient but a cheap power injector will 
introduce noise into the coax and make it a waste of effort.

High quality units do exist. Many cable companies use coax powered 
repeaters every N feet of cable. These repeaters are buried and many were 
not designed for two way traffic. The slow roll-out of cable modems in many 
areas is due to the need to dig up cables and install bidirectional repeaters.

-Erik

--
Erik Quackenbush, V.P. Operations, Midwest Filter Corporation
1-847-680-0566 fax: 1-847-680-0832 http://www.midwestfilter.com

///
///  shop-talk@autox.team.net mailing list
///  To unsubscribe send a plain text message to majordomo@autox.team.net
///  with nothing in it but
///
///     unsubscribe shop-talk
///
///


<Prev in Thread] Current Thread [Next in Thread>