shop-talk
[Top] [All Lists]

Re: Air Nibbler (option2:)

To: <Ccanepa50@aol.com>, <JackiHarry@aol.com>,
Subject: Re: Air Nibbler (option2:)
From: kengano@advant.com (Gano, Ken)
Date: Sat, 16 Nov 1996 22:31:03 -0600
I've been using an electric Milwaukee.  The knerf of cut is a bit much
(good 3/16"), but otherwise no complaints.  My $.00002

Ken Gano
kengano@advant.com
TR3A TS57756 (in pieces)

----------
> From: Ccanepa50@aol.com
> To: JackiHarry@aol.com; shop-talk-owner@triumph.cs.utah.edu;
shop-talk@autox.team.net
> Subject: Re: Air Nibbler (option2:)
> Date: Saturday, November 16, 1996 9:57 PM
> 
> Have you considered a body saw, it is an air powered reciprocating blade
saw
> with a short stroke, uses a blade like that in a hacksaw but 2-3" long.  
It
> is very compact  for tight areas and can cut very straight in the right
> hands, will cut shapes,  can cut thick sheet metal (16ga.) easily, and
also
> square tubes up to 1" diam. The Campbell-Hausfield was in the $ 50-60. 
range
> and has been a real workhorse.

<Prev in Thread] Current Thread [Next in Thread>