I assumed the judges were all middle-aged fat guys, and being one myself I
can tell you with confidence you want to avoid that show.
----- Original Message -----
From: "Wayne Osborne" <wayne@chevytrucks.org>
To: "Hanlon, Bill (ISS Houston)" <bill.hanlon@hp.com>; "Toms OLTRUK49"
<Tom3600@webtv.net>; <twelveport@mchsi.com>; <bowtiebits@msn.com>;
<ocradicic@hotmail.com>; <oletrucks@autox.team.net>;
<old-chevy-truck@yahoogroups.com>
Sent: Friday, October 31, 2003 9:37 AM
Subject: RE: [oletrucks] Changing your REAR END GEAR RATIO on 47-53
Chevy/GMC 3/4 ton
Only you would catch that Bill.... Depending on the judges gender-where's
that show at..LOL --wayne
At 07:53 AM 10/31/03 -0600, Hanlon, Bill (ISS Houston) wrote:
>Naked judges?
>
>-----Original Message-----
>From: Toms OLTRUK49 [mailto:Tom3600@webtv.net]
>Sent: Thursday, October 30, 2003 4:41 PM
>To: Tom3600@webtv.net; twelveport@mchsi.com; bowtiebits@msn.com;
>ocradicic@hotmail.com; oletrucks@autox.team.net;
>old-chevy-truck@yahoogroups.com
>Subject: [oletrucks] Changing your REAR END GEAR RATIO on 47-53
>Chevy/GMC 3/4 ton
>
>
>Hi Everybody ~
>
>Well, after many months of contemplating my naval and stalling around I
>FINALLY got my stock 3/4 ton 4.57 rearend gears replaced with 4.10
>gears. It really makes a difference in the low gear and the 5th gear
>in my S10 T5 tranny. I am sure that all you guys with 4.57 gear 3/4 ton
>pickups will appreciate the "slight" but actually significant difference
>in performance. Especially for you "stockers" because this switch is
>undetectable with the naked judges eye. HeHe
>
>Check it out at:
>http://community-2.webtv.net/Tom3600/REARENDGEAR/
>
>
>Tom
>http://community-2.webtv.net/Tom3600/REARENDGEAR/
>oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|