oletrucks
[Top] [All Lists]

[oletrucks] U-joint removal

To: Ole Truckers <oletrucks@autox.team.net>
Subject: [oletrucks] U-joint removal
From: tim <lloydt@Colorado.EDU>
Date: Sun, 15 Sep 2002 19:22:26 -0600 (MDT)
I think I've narrowed down my problem to the U-Joint between my 4-speed
transmission and closed drive shaft.  The speedometer works fine,
indicating that the tranny itself is fully functional, and the
gears-not-engaging sound gets louder with higher gears.

My problem is I can't seem to get at the inside of the U-joint.  I've
unbolted the rear cover, as well as the plate on the crossmember below the
U-joint.  There's an L-shaped bracket that's riveted to the plate, with a
big honkin' chunk of metal underneath it that prevents the bracket, plate,
and U-joint rear cover from moving very far past the crossmember.  What am
I doing wrong?  Is there something else I should be doing to inspect the
U-joint?  The shop manual is very unhelpful on this problem.

Thanks in advance,

Tim Lloyd, lloyd@lasp.colorado.edu
"Humanity has advanced, when it has advanced, not because it has been
sober, responsible, and cautious, but because it has been playful,
rebellious, and immature." -- Tom Robbins
"The eyes of the world now look into space, to the moon and to the
planets beyond, and we have vowed that we shall not see it governed
by a hostile flag of conquest, but by a banner of freedom and peace."
-- John F. Kennedy
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959

<Prev in Thread] Current Thread [Next in Thread>