Mark,
How about mounting to the steering column.
> [Original Message]
> From: <mark@noakes.com>
> To: <oletrucks@autox.team.net>; <afiggis@attglobal.net>
> Date: 6/2/02 12:07:45 PM
> Subject: Re: [oletrucks] tachometers
>
> The TF GMC's had a slot in the dash for a tach or clock, but the TF
Chevies had to do
> like what you would do in an AD truck. The dealer installed alternatives
were to cut a
> hole in the dash as you are thinking or to mount a tach in a steel cup on
the steering
> wheel column...so both fit the spirit of original if that matters to you.
Since I don't
> want to cut the dash in my Suburban, I found an original Sun Tach (3 1/2
inch) and
> chrome mounting cup. You do also need a transmitter for the old ones.
>
> Mark Noakes
>
> On Sun, 02 June 2002, John Mercier wrote
>
> >
> > Hi group, anybody have a good idea for mounting a tach in my 50 GMC? I
> > kinda want it readily visible so I don't want to put it under the dash.
I
> > was thinking of drilling a hole in the dash between to 2 gauge clusters
and
> > trying to fit one in there.
> > John Mercier
> > oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
--- Mike
--- passnb4u@earthlink.net
--- EarthLink: The #1 provider of the Real Internet.
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|