oletrucks
[Top] [All Lists]

Re: [oletrucks] Chassis paint

To: Bobby D Keeland <bob_keeland@usgs.gov>
Subject: Re: [oletrucks] Chassis paint
From: "A.B." <bigfred@unm.edu>
Date: Mon, 10 Dec 2001 09:37:03 -0700 (MST)
No primer needed.


On Mon, 10 Dec 2001, Bobby D Keeland wrote:

> Jim,
>
> Thanks for the info.  I think that POR-15 will be fine for my truck.  Can
> you apply that with either brush or spray?  Is there a POR-15 primer or is
> primer not needed?
>
> BobK
> 51 3600 5-window
> Arnaudville, LA
>
>
>
>
>
>                     dcvjrv@covad.
>                     net                  To:     "Bobby D Keeland" 
><bob_keeland@usgs.gov>,
>                                          oletrucks@autox.team.net
>                     12/06/01             cc:
>                     07:12 PM             Subject:     Re: [oletrucks] Chassis 
>paint
>
>
>
>
>
> Bob,
>
> I was going to have the frame on the truck powder coated but I didn't want
> to spend the $450 they were going to charge.  Powder Cote II was the name
> of the company that was going to do the powder coating for me.  They are
> not a small company.I did use POR-15 and as I recall, it didn't take but a
> quart to do the frame.  I also did the axles, springs, drums, etc....
>
> Hope this helps.
>
>
>
> Jim V.
> 1958 GMC Suburban Carrier Pickup (Cameo style) - V8 Hydramatic
> http://www.angelfire.lycos.com/mi2/jrvvehicles
> dcvjrv@covad.net
>
>
> At 03:29 PM 12/6/01 Thursday, Bobby D Keeland wrote:
>      For the frame alone they wanted about $900.  I've been told by a
>      couple of
>      people that this is not a bad price, but I can use a really good paint
>      for
>      much less than that.  I'm not sure what POR-15 would cost for just the
>      frame (nearly $100/gal), but I'm pretty sure that by doing it myself
>      (as
>      soon as I get my compressor and sand blaster next month when I get
>      reimbursed for something else I had to pay for) it would be quite a
>      bit
>      less.
>
>      BobK
>      51 3600 5-window
>      Arnaudville, LA
>
>
>
>
>
>                          "Bob KNOTTS"
>
>                          <raknotts@qwest.net>        To:     "oletrucks"
>      <oletrucks@autox.team.net>
>                          Sent by:                    cc:
>
>                          owner-oletrucks@auto        Subject:
>      [oletrucks] Chassis paint
>                          x.team.net
>
>
>
>                          12/06/01 01:17 PM
>
>                          Please respond to
>
>                          "Bob KNOTTS"
>
>
>
>
>
>
>      Abt what did they want for powder coating , Bob?  Bob K (PHX)
>      oletrucks is devoted to Chevy and GM trucks built between 1941 and
>      1959
>      oletrucks is devoted to Chevy and GM trucks built between 1941 and
>      1959
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959

<Prev in Thread] Current Thread [Next in Thread>