Yes, remove the bellhousing and bolt it to the block. If you plan on
tearing the engine down, may as well pull the flywheel and clutch, make
some "peen" marks for reassembly if you're going to use the same assy.
Careful too, the stand will be nose heavy with an i-6 on it.
> [Original Message]
> From: <Mikecdk@aol.com>
> To: <oletrucks@autox.team.net>
> Date: 12/3/01 7:28:29 AM
> Subject: [oletrucks] 216 to engine stand
>
> OK,
>
> I have the engine out of the '50 5 window on a cherry picker...just got a
new
> engine stand for a B day present!
>
> Can anyone tell me where this bolts too? Do I remove the bell housing
and
> bolt it to the block? where?
>
> Thanks much!!!
>
> Mike
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
--- Mike
--- passnb4u@earthlink.net
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|