As long as both compressors put out about the same PSI, it is really
pretty simple.
You need a T and some various hose fittings to hook the two compressed
air hoses together. This puts the compressors in parallel. You
also need two electrical circuits that are able to run both compressors
at the same time.
That's all.
Bruce Kettunen
57 3200
Mt. Iron, MN
At Sunday, 8 July 2001, you wrote:
>From what I can remember of the string you need the biggest compressor
that
>you can find, then hook up an even bigger one in series. Then go
down to
>the bar and bragg how big your compressor is and scoff at the guy
with the
>wimpy
>girly man compressor :)
>
>Jeff
>
>----- Original Message -----
>From: Don Simmons
>Sent: Sunday, July 08, 2001 9:41 PM
>To: oletrucks@autox.team.net
>Subject: [oletrucks] Compressor question
>
>Quite awhile ago there was a discussion about hooking 2 compressors up
>together for using sandblasters etc. I couldn't find the info about
hooking
>them up in the archives. Is there anything special I need to do
when hooking
>them up together? Can you hook up 2 different size compressors together?
>Thanks for any info in advance!
>
>Don Simmons
>oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>
===================================================================
EASY and FREE access to your email anywhere: http://Mailreader.com/
===================================================================
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|