There is a single wire running innside the column on the top. Right behind
the dash at the column on the top should be a single wire with a bullet
shaped push on connector. That wire connects to a black wire from the new
harness and it is wire number 20. The 2 wires by the horn attach with the
red wire hooked to the terminal closest to the fender, the black to the
other. Often times, the horn button parts are worn out and need repalcing,
requiring pulling the steerung wheel. Hope this helps.
Mike Suriano wrote:
> Can someone please explain to me how to wire the horn?
> I have the complete harness (Chevy Duty) all hooked up
> but for the life of me can figure out how the horn
> hooks up to the steering wheel. I have the a terminal
> that goes to the horn and one ending inside the cab.
> I assume that I need to run a wire from there to the
> horn button? How does this thing attach to the
> steering wheel? I've looked over the manuals and I can
> find a picture of it at all. Can someone help me out?
>
> Thanks,
> Mike
> Clueless on Cape Cod
>
> =====
> 1959 Chevy Apache
>
> __________________________________________________
> Send instant messages & get email alerts with Yahoo! Messenger.
> http://im.yahoo.com/
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|