GMC shop manual says 25-30 ft/lb on two front and two rear nuts (thick
washers/nuts on studs) and 15-20 ft/lbs on inner studs with bowtie
clamps/nuts. This is for all 6 cyl engines. 235 should be similar.
Jack / Winter Park FL
----- Original Message -----
From: <BDober@aol.com>
To: <oletrucks@autox.team.net>
Sent: Wednesday, March 15, 2000 2:35 PM
Subject: [oletrucks] Torque for Manifold Bolts
> On a 235 engine, does anybody know what the correct torque level is for
the bolts for the exhaust/intake manifold. Could not find any reference in
the shop manual.
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|