Dear Gang:
I decided to try to get my fuel guage to work yesterday. I looked at the
sending unit on the tank and found one wire attached and another wire just
hanging in the breeze. I jumpered from the tank connection to the guage and
the needle jumped to F.
When I turn my ignition switch on, the needle would always before move
about a 1/4 of an inch to about 1/4 tank position. Now the needle jumps
around, is sometimes all the way on F and sometimes in the 1/4 position.
Any ideas???
Jon Callahan '50 3100
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|