Wayne, I guess those of us whose pictures you have posted on your website
should not miss an opportunity once again say a big, hearty "THANK YOU"!
Many of us don't have websites yet, and it sure provides a way to display
our oletrucks. I really appreciate all your work.
Tom Caperton
'47 2nd 3100
-----Original Message-----
From: Wayne Osborne <wcosborne@inetnow.net>
To: oletrucks@autox.team.net <oletrucks@autox.team.net>
Date: Tuesday, June 08, 1999 11:34 AM
Subject: Re: [oletrucks] Vacuum Advance on 235 engines
>Sure, i'll broadcast the URL........
>My home page is:
>http://www.chevytrucks.org/users/wayne/
>with the oletrucks members page at:
>http://www.chevytrucks.org/users/wayne/member.html
>
>Any newer members of the list that want their truck added to this list
>e-mail me off list with the photo file and i'll be glad to include it....
>Wayne Osborne
>>
>>Oh, & I like your colection of gllerie pictures. I've seen most of them
>>before & I think Wayne has many too (with names of owners); sorry forgot
his
>>last name & homepage URL. If he sees this he should broadcast them to
you.
>>
>>Regards,
>>Doug Pewterbaugh
>>dpewter@msn.com
>>Denton, TX
>>49 3104 216 5-window
>>-----Original Message-----
>>From: Allen L. Jones <ALJ@hartcrowser.com>
>>To: peter@petervolwerk.demon.nl <peter@petervolwerk.demon.nl>
>>Cc: oletrucks@autox.team.net <oletrucks@autox.team.net>
>>Date: Monday, June 07, 1999 8:29 PM
>>Subject: Re: [oletrucks] Vacuum Advance on 235 engines
>>
>>
>>>Peter,
>>>
>>>Nice ride!!! I commend you on such a beautiful truck given you must not
>>have several junkyards and parts stores around you (at least ones that
carry
>>'58 Chev and big block parts). I especially like the "it's huge and very
>>powerful" part!
>>>
>>>Allen
>>>'50 3100
>>>
>>>PS Your English is just fine.
>>>
>>>>>> "Peter Volwerk" <peter@petervolwerk.demon.nl> 06/07/99 03:48PM >>>
>>>Hello John,
>>>
>>>I like to tell you about the same problem I had this week, my Vacuum
>>Advance
>>>was leak, also the centrifugal advance wasn't good.
>>>The centrifugal advance I repaired with oil and cleaning but with the
>>vacuum
>>>advance I had to do some real work.
>>>
>>>First thing I did was sawing around the house where the iron is bent
>>double,
>>>so I could seperated the two halve's of the house, be carefull not to saw
>>to
>>>deep because the diaphragm is also there.
>>>When you take the two parts from each other you will notice a spring and
a
>>>adjustible washer on the side where you atached the hose, on the other
side
>>>you will find a arm that will connect inside your distributor, the
>>diaphragm
>>>is connected to this arm and you can removed it from the house, now you
can
>>>check on leaks and repair the leak with a normale tube repair you will
use
>>>for your bycicle.
>>>The only problem now is how to atached the two halve house's to
eachother,
>>>well take only the metall housing parts and dril 8 hole's about 2/16"
each,
>>>but remember to dril as much as possible to the outher side off the house
>>>because other wise you won't be able to put the screws in the hole's.
>>>Now put everything back to getter and make sure the diaphragm is between
>>the
>>>two parts of the housing, with a small point make a hole in the diaphragm
>>>where you dril the hole's and fit the two parts to getter.
>>>
>>>I have placed a photo on my webside for a look on how I did it because I
>>>know my English isn't that good.
>>>
>>>I hope this will help you,
>>>
>>>Peter 58 3100 454 Cu Inch
>>>http://www.petervolwerk.demon.nl
>>>
>>>----- Oorspronkelijk bericht -----
>>>Van: <JWSuther1@aol.com>
>>>Aan: <oletrucks@autox.team.net>
>>>Verzonden: maandag 7 juni 1999 4:56
>>>Onderwerp: [oletrucks] Vacuum Advance on 235 engines
>>>
>>>
>>>> Hello Everyone - In the past I've had the Vacuum Advance go bad on my
235
>>>> engine in a TF truck and have never noticed anyone on the list having
>>this
>>>> problem. I had no luck finding one at any of the Ole Truck Vendors or
>>>NAPA
>>>> in the past and always found an old one on a truck in one of the
salvage
>>>> yards that worked. I started carrying a spare in my "FlyAway Kit" on
>>>longer
>>>> trips as it sure don't run good without it.
>>>> Anyone know of a source for these? All the talk about Timing 235s
lately
>>>> reminded me of this problem and it would sure be nice to have a new
one.
>>>>
>>>> Best Regards - John Sutherland
>>>> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>>>
>>>
>>>oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>>>
>>>oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>>
>>
>>oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>>
>
>---------
> http://www.chevytrucks.org/users/wayne
>For a quick view of oletrucks mailing list members trucks go to:
> http://www.chevytrucks.org/users/wayne/member.html
>
>
>oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|