I prefer the gmail client.
Sent from my iPad
On Aug 6, 2013, at 4:48 PM, Rick Lindsay <richardolindsay@gmail.com> wrote:
> Thanks Dan. B Android e-mail tool only allows fancy-schmancy text, with no
simple ASCII text option. B Sorry.
>
>
> Sent from my Samsung Galaxy SIII - the rectangle with rounded corners, just
like a BlackBerry.
>
> -------- Original message --------
> From: Dan DiBiase <d_dibiase@yahoo.com>
> Date: 08/06/2013 4:40 PM (GMT-06:00)
> To: Rick Lindsay <richardolindsay@gmail.com>
> Cc: mgs@autox.team.net
> Subject: Re: [Mgs] [Mg-t] Starter rebuild...
>
> Not sure why all the 'B's' when you post from your Galaxy, Rick, but reading
the posts with them reminds me of Mushmouth -
>
> http://www.youtube.com/watch?v=pMADJcimnds
>
> (You'll get the idea in the first 15 seconds or so..... ;-)
>
> Dan D
> '76B, '65B
> Central NJ USA
>
>
>
> ________________________________
> From: Rick Lindsay <richardolindsay@gmail.com>
> To: kingseim@earthlink.net
> Cc: mgs@autox.team.net; mg-t@autox.team.net
> Sent: Tuesday, August 6, 2013 5:20 PM
> Subject: Re: [Mgs] [Mg-t] Starter rebuild...
>
>
> Hi John. B Thanks. B They may be aluminum. B If so, I understand the
problem. B Thanks.
>
> -rick
>
>
> Sent from my Samsung Galaxy SIII - the rectangle with rounded corners, just
like a BlackBerry.
>
> -------- Original message --------
> From: John Seim <kingseim@earthlink.net>
> Date: 08/06/2013B 4:18 PMB (GMT-06:00)
> To: Rick Lindsay <richardolindsay@gmail.com>
> Cc: mg-t@autox.team.net,mgs@autox.team.net
> Subject: Re: [Mg-t] Starter rebuild...
>
> Chances are, you have aluminum replacement coils in your starter.
> Originally, the brushes were crimped to the aluminum, as you cannot solder
> them. Might have been spot welded. When brushes need to be replaced,
> and the field coil is made of aluminum, best to replace the field coils
with
> those made of copper.
>
> John Seim
> Irvine, CA
>
> On Aug 6, 2013, at 2:00 PM, Rick Lindsay wrote:
>
>> Hi Friends,
>>
>> My '53 TD's M35G starter rebuild is almost complete. B Everything is clean
and lubricated, where appropriate. B Bushes are just fine, oil soaked and
their journals are smooth.
>>
>> What I did discover is that the brass terminal post is not soldered to the
field windings! B The two flat conductors from the field, were just pinched
into the slot in the inner end of the post. B They were quite grimey at the
contact point, so they've been like this for quite a while.
>>
>> Reviewing the workshop manual today, I see that the flat conductors should
be (apparently) soldered to the post. B Can you verify that is correct? B
Considering the current drawn, I can't imagine that a simple press-fit
connection is valid - but I could be wrong. B Your thoughts?
>>
>> -rick
>>
>>
>> Sent from my Samsung Galaxy SIII - the rectangle with rounded corners, just
like a BlackBerry.
>> ______________________________________________
>>
>> Mg-t@autox.team.net
>> Donate: http://www.team.net/donate.html
>> Suggested annual donationBB $11.47
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage:
http://autox.team.net/mailman/options/mg-t/kingseim@earthlink.net
> _______________________________________________
>
> Mgs@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donationB $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/mgs/d_dibiase@yahoo.com
> _______________________________________________
>
> Mgs@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/mgs/ptrmgb@gmail.com
_______________________________________________
Mgs@autox.team.net
Archive: http://www.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/mgs/mharc@autox.team.net
|