Mark,
Thanks for the info. I looked at the site and I see it is a goop
sort of stuff. Unfortunately I have to have an easily removable
gasket as one tends to have to fit, then unfit, then fit again
because some things require that, and I also (you may not believe
this) make mistakes! The head, for instance, sometimes requires it
coming off, changing he shims under the cylinder liner and
re-torquing down, then taking off the head again to check that the
liner is EXACTLY 1mm proud ! Thank heavens this is already
done. The W.O. Bentley designed Aston 3L engine is a pig - but once
together is brilliant. So I have to get soe sheet type material and
seems I will need a couple of differenr thicknesses and materials.
Can you tell me how many people are in the Aston Martin list
please? Can I give you a whole pile of email addresses to add? I
was thinking of getting the members of the Aston Martin Feltham Club
to join (73 so far) see www.AMFClub.com.
At 04:46 PM 1/3/2013 -0700, Mark J Bradakis wrote:
>The Right Stuff from Permatex - expensive but it works.
>
>mjb.
>_______________________________________________
>
>Mgs@autox.team.net
>Donate: http://www.team.net/donate.html
>Suggested annual donation $12.75
>Archive: http://www.team.net/archive
>Forums: http://www.team.net/forums
>Unsubscribe: http://autox.team.net/mailman/options/mgs/barrie@look.ca
Regards
Barrie
barrie@look.ca
705-721-9060
_______________________________________________
Mgs@autox.team.net
Archive: http://www.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/mgs/mharc@autox.team.net
|