To: | "W. David Houser" <mgs4dave@tampabay.rr.com>, "MGList List" <mgs@autox.team.net> |
---|---|
Subject: | Re: [Mgs] 67 MKI upper steering column nylon bearing |
From: | "PaulHunt73" <paulhunt73@virginmedia.com> |
Date: | Fri, 7 Sep 2012 09:00:43 +0100 |
Delivered-to: | mgs-archive@autox.team.net |
Delivered-to: | mgs@autox.team.net |
References: | <140AEC1F-1A67-40CE-8B76-7551DA4D57F0@tampabay.rr.com> |
You should be able to do that on a North American Mk1 (pre 1972 models elsewhere), as far as I'm aware on non-collapsible columns it does just pull straight out, it was a separately quoted part. PaulH. ----- Original Message ----- > I was hoping to remove the top bolt from the steering universal, pull out > the > top inner shaft and then remove the old bushing and replace the new one to > take up the play I have there. _______________________________________________ Mgs@autox.team.net Archive: http://www.team.net/archive Unsubscribe: http://autox.team.net/mailman/options/mgs/mgs-archive@autox.team.net |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: [Mgs] soldering corroded copper, PaulHunt73 |
---|---|
Next by Date: | Re: [Mgs] 67 MKI upper steering column nylon bearing, Max Heim |
Previous by Thread: | [Mgs] 67 MKI upper steering column nylon bearing, W. David Houser |
Next by Thread: | Re: [Mgs] 67 MKI upper steering column nylon bearing, Max Heim |
Indexes: | [Date] [Thread] [Top] [All Lists] |