I am a bit puzzled by this. I put a stock exhaust on my 64B, purchased from
Moss or a reseller maybe two years ago. A check at Moss Motors shows parts and
prices, indicating they should still be available (unless temporarily out of
stock?).
http://www.mossmotors.com/Shop/ViewProducts.aspx?PlateIndexID=29007
As far as my experience, for the original post, my MGs are all running stock
exhaust systems (64b, 67BGT, 72B). For a long time, probably 1980 to maybe
1999, I used the ANCO or ANSI (I think that was the name) exhaust which had a
more tubular muffler. I liked the rounded muffler because it was less likely
to catch on road bumps and as I recall, it seemed a bit quieter than the
stock. I don't see it on Moss website now so I am not positive I have the name
right.
It is hard to say which exhaust is truly louder though without comparing two
cars side by side or measuring with a decibel meter though. I just know the
original exhaust works fine and is inexpensive.
David Councill
-----Original Message-----
From: mgs-bounces@autox.team.net [mailto:mgs-bounces@autox.team.net] On Behalf
Of Don
Sent: Friday, August 17, 2012 2:20 PM
To: mgs@autox.team.net
Subject: [Mgs] mufflers
On this subject . . .
My '67 B has a straight pipe where the muffler should be. I want to get a
stock muffler for it, but Moss doesn't have them. A friend says the Moss
mufflers for later Bs can be adapted to a Mk 1 car. Anyone done this?
Does anyone have any experience buying or using a stock type muffler on an
early B?
Thanks!
Don Scott
_______________________________________________
Mgs@autox.team.net
Archive: http://www.team.net/archive
Unsubscribe:
http://autox.team.net/mailman/options/mgs/mgs-archive@autox.team.net
|