My question is where does the buzzer wire connect on the steering column end?
I can't find a terminal on the lock mechanism or anywhere else on the column
to attach the wire to.
I know it's somewhere on the column because I checked the function before I
took the car apart several years ago.
I should have taken pics because of this "CRS" brain of mine!
----- Original Message -----
From: Paul Hunt
To: dannyvarnado ; mgs@autox.team.net
Sent: Saturday, August 02, 2008 3:21 AM
Subject: Re: [Mgs] Ignition switch wiring
It will connect to the lock rather than the switch, as you say it outputs a
ground whenever the key is in the lock and doesn't change regardless of where
switch is turned to. It was independent of the sequential seat belt system,
they just both happened to operate the same buzzer.
PaulH.
----- Original Message -----
Can anyone tell me what the purple/pink stripe wire in the ignition
switch
harness attaches to on the steering column end?
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs
http://www.team.net/archive
|