Re: 25D4 vs. 45D4

["Paul Hunt" <paul.hunt1@blueyonder.co.uk>]

The ground wire is usually secured under the screw that holds the points
plate base in place.  This is recessed into the body of the distributor (the
ones I have at any rate) and needs no cut-out in the cap to clear them.
There *is* a recess in the cap, but that is for the locating peg, so it can
only be fitted in one orientation.

PaulH.

----- Original Message ----- 
> The replacement disributor cap they suggest has a cut out area for the
ground wire  - but this new replacement distributor has the ground wire
exiting out the distributor body.