You can buy appropriate square stock drive at NAPA.
Larry Hoy
> -----Original Message-----
> From: owner-mgs@autox.team.net
> [mailto:owner-mgs@autox.team.net] On Behalf Of Jim Baustian
> Sent: Tuesday, August 17, 2004 4:05 PM
> To: mgs@autox.team.net
> Subject: Angle Drive repair
>
> The following is from Michael Salter of Precision Sports Car
>
> The usual cause of failure of the speedo angle drive is
> breakage of the short piece of speedo inner cable that
> inserts into the pinion in the gearbox.
> You can replace it, presuming that you have a piece of speedo
> cable with a squared end on it.
Check out the new British Cars Forum:
http://www.team.net/the-local/tiki-view_forum.php?forumId=8
|