A while ago, someone else was trying to figure out how to connect their
fuel lines so I took some pictures.
Here was my 71BGT hose setup -
http://www.imt.net/~dcouncil/mg/su_setup.html
David Councill
67 BGT
72 B
At 05:24 AM 9/30/2003 -0400, S Twigg wrote:
>Everyone,
> I in the midst of converting my 75B from the ZS to a set of
>HS4's from a 1970 (AUD405F & R). My problem lies in the fuel vent line.
>I created a T to connect the two lines from the front and back fuel
>bowls to the single vent line that went from the ZS to the carbon
>canister. After I had everything connected correctly the vent line
>proceeded to fill the canister with gas and I believe the engine was
>flooded - that is when I gave up for the day.. So obviously something
>is wrong with the equation. I know I need to check float levels but is
>there anything else? Also, anyone have thoughts, ideas, and/or pictures
>on how all the hoses should run?
|