To Max, Barney, and Paul goes the prize of the day-I was retarded and so was
the timing. As you suggested, I checked the TDC mark on the pulley for
accuracy and it was about 5 degrees off, clockwise past TDC. I reset timing
(still about 20 degrees advanced) and it is running fine now and will hold
idle at about 550 RPM. Rechecked carbs using liftpins and they are fine.
My next issue is to get the valve cover to stop leaking.
Thanks,
Monte
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|