mgs
[Top] [All Lists]

Re: The leather seat thread prompts a question....

To: "Stuart MacMillan" <macmillan@attbi.com>, <mgs@autox.team.net>
Subject: Re: The leather seat thread prompts a question....
From: "Telewest \(PH\)" <paul.hunt1@blueyonder.co.uk>
Date: Sun, 12 Jan 2003 14:25:38 -0000
The seat frames would have changed in 67 with the wider tunnel for the
4-synchro gearbox, these have seat foams and covers with a corresponding
taper.  If you have the reclining seat backs they should have the tapered
seats.  The foam sculpturing also changed at some time adding to the
permutations.  After-market leather covers are available for the later
frames as well as the earlier.  Current foams seem to be much denser than
the originals and give a higher 'ride height', you might want to cut an inch
or so off the bottom to stop thighs fouling wheel and head the roof if a GT.

----- Original Message -----
From: "Stuart MacMillan" <macmillan@attbi.com>
To: <mgs@autox.team.net>
Sent: Sunday, January 12, 2003 2:11 AM
Subject: The leather seat thread prompts a question....


> I have the late style reclining seats with head restraints in my '65 ...
Now those seats
> are worn out, and I'm wondering if the seat frames are actually the same
> size between early and late...

///  or try http://www.team.net/cgi-bin/majorcool
///  Archives at http://www.team.net/archive


<Prev in Thread] Current Thread [Next in Thread>