Kevin,
I just happen have a spare one in hand (from '79B) and the wires are
opposite your statement, i.e. black = left and red/white = right. I don't
think it matters as these are for the illumination only. The rear plug
(one-way keyed) is for the motor speeds.
Mike
'79B
----- Original Message -----
From: "Kevin Shertz" <kshertz@bellatlantic.net>
To: "MG Listserv" <mgs@autox.team.net>
Sent: Wednesday, July 31, 2002 8:47 PM
Subject: '80 MGB fan switch
> All,
>
> While replacing the fan switch on my B, the old switch partially broke
> apart, removing the wires on the sides of the switch.
>
> Looking at the switch (from drivers seat view), the black wire should go
on
> the right side, and the red/white should go on the left, correct? Or do I
> have it backwards?
>
> TIA...
>
> Kevin
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|