mgs
[Top] [All Lists]

Loom routing question

To: "'spridgets@autox.team.net'" <spridgets@autox.team.net>,
Subject: Loom routing question
From: "Louis Mehr (EML)" <Louis.Mehr@eml.ericsson.se>
Date: Mon, 8 Oct 2001 15:03:28 +0200
Good morning listers,

This must be an easy question to answer !
Could someone please advise of the correct routing for the wiring loom from 
front to rear on my 1971 AH Sprite.

As recevied the wiring has been lashed up and currently runs along the RHS of 
the driver's seat and then into the driver's wheelarch via the lowest hole in 
the post beside the driver. ( I'm not sure if the term for this is B-Post, it's 
the one that has the 3 hoodframe locating bolts at its top,)  

Now that I want to add the trim to the post it's clear that if I leave the loom 
as it is I'll have to punch a hole in the trim.  This can't be right so where 
should the loom be located? 
 

Thanks in advance,  
Louis Mehr
Manchester, UK
1971 AH Sprite RHD- it now not only starts but has working brakes as well ! 

///
///  mgs@autox.team.net mailing list
///  or try http://www.team.net/cgi-bin/majorcool
///


<Prev in Thread] Current Thread [Next in Thread>
  • Loom routing question, Louis Mehr (EML) <=