Re: SU Adjustments (LONG!) was: Float Height Issue

["R. O. Lindsay" <rolindsay@dgrc.com>]

Max Heim wrote:

> OK, I admit this is more complicated than I thought...
>
> I'm still a little dubious that a pressure differential of .0012psi could
> make any discernable difference (difference of + or - 1/32nd inch fuel
> depth, which is about the difference one washer thickness would make).

...and I agree.

   The mixture nut is about a 24 tpi thread.  That means, one entire
revolution of the mixture nut / jet height adjustment makes 1/24" or
0.042" difference in the height of the jet.

Rick