RE: Conflicting Plug Gaps

[harlanjillson <harlanjillson@pdq.net>]

Well,
   As they say, opinions are like a!?holes, everyone has one, even John Twist.
The only time you should open the gap up to 0.035" is if you're running a high 
energy coil, 30-40 KV.  The standard coil (~17KV) can cause a miss at high rpm 
when gapped too wide.
  And that's JMHO.
Harlan

>So I'm reading the new Classic MG mag and in John Twist's article he says to
>gap plugs in all MG's but T-types at .035".
>
>My Owner's manual says .025".
>
>Porter's MGB Service guide says .024".