Re: Valve Clearances MGB

[<paul.hunt1@virgin.net>]

Same here.  I also use .014" as a go and .016 as a no-go.

PaulH.

----- Original Message -----
From: <Nferre@aol.com>
To: <djc@appsig.com>
Cc: <mgs@autox.team.net>
Sent: Monday, October 16, 2000 4:05 PM
Subject: Re: Valve Clearances MGB


> Hi All!
>
> Thanks to those who replied.
>
> It turns out the correct meaurement is .013" Hot and .015" cold.  I prefer
to
> adjust mine cold...after all, how hot is hot?  Also, they are cooling
whilst
> being adjusted.
>
> Nels Ferré
> Lake Mary, FL
> 79 MGB
>