Re: MGB engine on the rise (was Re: MGB dead engine report.)

[RJohn50603@aol.com]

In a message dated 10/1/98 2:56:24 PM Central Daylight Time,
saschris@flash.net writes:

<< I'll agree that you cannot rebuild a motor in situ.  You can, however,
 remove the sump, oil pump, re-ring the pistons, replace rod bearings, and
 replace the camshaft without removing the engine.  I did it last winter.
  >>

You can also "roll in" a set of main bearings.

R. Johnson - Dallas