No worries, Chris! Just point your Web browser to:
http://www.team.net/www/mg/tech/twist/jt-tech2.html
then go to the paragraph which begins:
MGB WEEPING CYLINDER HEAD
and read the wisdom of John Twist. It really does work. I've done it.
Regards,
Jerry
> I know this sounds like a blown head gasket. Some tell tale whitish stains
> between #'s 2 & 3 on the head . . . So, is it likely at this point that a
> re-torque will cure my problem, or am I looking at re-surfacing the head
> for flatness) and replacing the head gasket?
|