Re: Driving light bracket

[MLishego@aol.com]

In a message dated 97-08-11 10:42:54 EDT, donmathis@lucent.com (Don Mathis)
writes:

>  I was going to polish with Brasso, clean with brake
>  cleaner to remove any oil and finger prints, and spray with clear Krylon.

Try polishing it or lightly sanding the plate with fine paper or steel wool.
 Then try dipping in the polyurethane that you would use for wood
refinishing.  I used this technique on brass golf clubs, and it is durable
and beautiful!
~Mike Lishego