MGB "V8" Control Arm Bushings

["Richard A. Boris" <borisri@earthlink.net>]

Hi Everyone:

        Need some guidance regarding the replacement of the rubber control arm
bushings. It seems everyone suggests using the "V8"( qty 4) bushings in
lieu of the OEM type (qty 8). The "V8" bushings have a steel insert
inside and ride on the wishbone bolt, while the OEM type the rubber
bushing rides on the wishbone bolt. Question, we have metal to metal
interface, what lube type should be used to prevent excessive friction
and subsequent wear?

                                                                        Thanks: 
Rich Boris
                                                                        67B 
Roadster