>
>I don't know if you got my other post so... I checked my overflow pipes
>and the bracket seems to mount to the inside (engine side) of the motor
>mount. I can't crawl under the front end right now cause the back is on
>jacks for brake work. The pipes seem to empty out on the block flange
>were the oil pan attaches
>
>- -Mark
>
>
On page 53 of "MGB The Illustrated History" by Jonathan Wood and Lionel
Burrell, there is a photo of a '64B motor and transmission that shows the
mounting location of these pipes. One is bolted to the front bolt holding the
fuel pump blanking plate. The other is bolted towards the rear of the block
just above the oil pan.
Ken Roach
Saskatoon, Sask. Canada
'74 B currently in pieces :(
|