On Mon, 26 Aug 1996, Ulix Goettsch wrote:
> That won't work on a Midget. The hole is between 3/8" and 1/2". It would
> be _too_ easy otherwise.
> I bought a used tool with many different sizes on it and strangely I still
> don't have one that fits exactly.
> I ahev no idea what the correct tool looks like.
Go to a _real_ hardware store. One that has a bunch of older men working
there. The tool your looking for will be in a small flat drawer in a big
chest of small flat drawers. I don't know what they're called but it's
just a piece of 7/16" bar stock about 2" long. They come in all sizes.
Stick it in the hole and put a wrench on the end. Most American cars use
3/8" or 1/2" so you can just stick a socket drive in there.
Kevin Sullivan -- 1960 MGA kevins@khoral.com
Khoral Research Inc. http://www.khoral.com
Albuquerque NM USA
|