Re: Finally, I've removed my head.

[etaylor@nr.infi.net (Ed Taylor)]

<SNIP>

>  Anyway, the final solution?  I purchased a ratched stud extractor from
>McMaster-Carr.  This pulled out all the studs except for the one problem
>stud between plug holes #2 & #3. 

Jeremy:
Having sweated through this once, be sure to do what the DPO didn't do!
Apply anti-seize compound to those threads when you reinstall the cylinder
head studs.

Ed (Been there-done that) Taylor
Greensboro, NC