> Take it to a chrome shop, if one exists in your region. What they do
> (and what you could do) is immerse the part in sulfuric acid and pass
> current through it, which etches the chrome off. Results in some
> hydrogen embrittlement, but that shouldn't be a problem, since your
> part is not structurally significant.
>
> A. B. Bonds
>
>
does anybody know if the dipping process in sulfuric acid has any effect on
the rust on these parts. Eats it away or enhances the corrosion?
I have some small grill parts that I need re-chrome and they have alittle
bit of rust on them.
|