mgb-v8
[Top] [All Lists]

RE: Cruise control

To: Jack Emery <jemery@mint.net>, mgs@Autox.Team.Net
Subject: RE: Cruise control
From: Larry Hoy <larryhoy@cwix.com>
Date: Sat, 19 Dec 1998 17:27:35 -0700
Cc: mgb-v8@Autox.Team.Net
Importance: Normal
In-reply-to: <3.0.32.19981219170030.0068af3c@mint.net>
Reply-to: Larry Hoy <larryhoy@cwix.com>
Sender: owner-mgb-v8@Autox.Team.Net
Jack, there was a discussion on the MG list about cruise control maybe a year
ago.  Someone said the J.C. Whitney unit worked just fine.

There was also mention of a unit (JC Whitney??) that senses pulses from your
coil so there is no need for magnets on the driveshaft.  Also no need for a
clutch switch as the unit instantly senses any "quick" changes in rpm and will
turn off with a change in rpm over a predetermined amount.

Having said all this I have no first hand knowledge, just passing on what was
discussed on the list.  Maybe we'll get some new input.

Larry Hoy, Denver, CO. USA
1967 MGB Roadster, Vintage Racer
1969 MGB Roadster, Driver
1970 MGB Roadster, Fixer upper
http://home.cwix.com/~larryhoy@cwix.com

> Cc: mgb-v8@Autox.Team.Net
> Subject: Cruise control
>
>
> As Bob and I were doing a 400 mile roadtrip in the truck today we started
> talking cruise for my V-8 and his MGC.  Has anyone used the JC Whitney
> unit?  I realize that they are considered the lowest form of parts
> purveyors, but who else vends one?  I know other "specialists" in the
> conversion business list one.  Napa may be able to source one.  We do not
> want to adapt a junkyard unit or scratch build.  I know we will need to add
> a clutch switch and use the magnet on the driveshaft, no problems in the
> fitting.  What we want to know before blowing $200 of our recreational
> beverage fund, will it work reasonably well.  The rod guys are using mostly
> GM units with a big servo piston.  We want small.  And inexpensive.
> Jack Emery
> Glenburn Maine
> '67 MGB V-8
> many others



<Prev in Thread] Current Thread [Next in Thread>