mg-t
[Top] [All Lists]

Re: [Mg-t] Making a gasket

To: Mark J Bradakis <mark@bradakis.com>
Subject: Re: [Mg-t] Making a gasket
From: Jerry Felper <felperg@earthlink.net>
Date: Mon, 30 May 2011 20:34:29 -0700
Mark
It may be leaking from the bolt. It goes into the water jacked.
Jerry

On May 29, 2011, at 4:28 PM, Mark J Bradakis wrote:

> And are you sure it is the joint that is leaking, and you are not
> having a porousity issue with the housing?
>
> mjb.
> ______________________________________________
>
> Mg-t@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $11.47
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: 
>http://autox.team.net/mailman/options/mg-t/felperg@earthlink.net
>

British Auto electric
jerry@britishautoelectric.com
______________________________________________

Mg-t@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>