mg-t
[Top] [All Lists]

[Mg-t] [Fwd: Re: TD Charging Problem]

To: taterry@aol.com
Subject: [Mg-t] [Fwd: Re: TD Charging Problem]
From: Dave and Liz DuBois <ddubois@sinclair.net>
Date: Wed, 11 Nov 2009 16:17:40 -0800
Terry,

You are right, got my wires crossed - Scott, put the jumper wire on the 
smaller terminal of the generator.

Cheers,
Dave

-------- Original Message --------
Subject:        Re: [Mg-t] TD Charging Problem
Date:   Wed, 11 Nov 2009 17:30:32 -0500
From:   taterry@aol.com
To:     ddubois@sinclair.net
References:     <2085.75.92.178.86.1257975945.squirrel@webmail.donobi.net>



Dave, I always flash the fields, not the armature....it looks pretty 
much like a short circuit....but maybe either works.
Terry

-----Original Message-----
From: Dave and Liz DuBois <ddubois@sinclair.net>
To: S Allen <s4usea@yahoo.com>
Cc: mg-t@autox.team.net
Sent: Wed, Nov 11, 2009 1:45 pm
Subject: Re: [Mg-t] TD Charging Problem

Scott,

Terry has it right for testing the generator, but for detailed
instructions, see the article, Testing a Dynamo/Generator in the Other
Tech Articles section of my web site at:
http://homepages.donobi.net/sufuelpumps/

The gentleman you are looking for is Bob Jeffers.  His e-mail address is
in the article above.

To flash the generator, remove your cloths, get a rain coat...oops, 
wrong
flashing.  Seriously, disconnect the two wires from the generator, 
connect
a piece of wire to the large terminal on the generator, quickly wipe the
other end of the wire across whichever battery terminal is not connected
to ground once or twice (you should see some arcing when you do that).
Disconnect the jumper wire and reconnect the wires removed.

Cheers,
Dave

> Hi,
>
>
> It's been a while since I've been on the list, and I've missed it.
>
>
> As some of you may remember, I have a '52 TD.
>
>
> The battery is no longer charging.  At 3500rpm the charge light is on,
> the
> ammeter is on zero, and when I put a voltmeter on the battery it's
> at 12.4
> volts.
>
>
> The generator was re-built by a local armature shop five years ago.
>
>
> I had the Reg converted to solid state four years ago by a gentleman 
on my
> list.
>
>
> Two questions:
>
>
> 1.  How do I use the voltmeter to test if the Gen or the Reg is the
> problem?
>
>
> 2.  Does anyone remember who does the OEM to solid state conversions?
> I
> believe he was somewhere up in NH or Vermont and I can't find the
> receipt...
>
>
> Any help appreciated, and it's good to be back,
>
>
> Scott Allen
>
>
> 52 TD
>
> 74 1/2 BGT
> _______________________________________________
>
> Support Team.Net  http://www.team.net/donate.html
>
> Mg-t@autox.team.net
> http://autox.team.net/mailman/listinfo/mg-t
>
> Archives at http://www.team.net/archive
Mg-t@autox.team.net
http://autox.team.net/mailman/listinfo/mg-t

Archives at http://www.team.net/archive
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

Mg-t@autox.team.net
http://autox.team.net/mailman/listinfo/mg-t

Archives at http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>
  • [Mg-t] [Fwd: Re: TD Charging Problem], Dave and Liz DuBois <=