mg-t
[Top] [All Lists]

Re: TD Front Engine Mount

To: Bob Howard <mgbob@juno.com>
Subject: Re: TD Front Engine Mount
From: Bud Krueger <budkrueger@earthlink.net>
Date: Mon, 10 Mar 2003 14:32:50 -0500
Hi Bob,

      Actually, this started by my having installed new rear mounts after having
had the rear mount 'ring' rewelded.  BTW, I have a new Moss-style mount coming
from Skip Kelsey.

Bud

Bob Howard wrote:

> Bud,
>   I used the Moss part when I replaced mine. It fit fine and seems to be
> OK five years later.  Check rear mounts while you are at this---mine were
> much more deteriorated than the front.   With the new front mount (only)
> in place, the starting handle would not align with the crankshaft pulley.
> With new rear mounts in place, starting handle and engine line up as they
> should.
> Bob
>
> On Sun, 09 Mar 2003 19:05:43 -0500 Bud Krueger <budkrueger@earthlink.net>
> writes:
> > It looks as if I should replace my front engine mount of my TD while
> > I'm working in the area.  I just discovered that there's a very big
> difference
> > in the pricing of Moss versus Abingdon Spares.  Moss' Part Number
> 411-010
> > is listed at $15.50.  Abingdon Spares wants $46.37 for their Part
> Number 03-001.
> > Can anybody shed some light on this one?  TIA.
> >
> > Bud Krueger
> > 52TD

///  unsubscribe/change address requests to majordomo@autox.team.net  or try
///  http://www.team.net/mailman/listinfo
///  Archives at http://www.team.net/archive/mg-t


<Prev in Thread] Current Thread [Next in Thread>