Did reports that it's not getting far enough down in the hole to engage the
gear.
Scott
>From: TATERRY@aol.com
>To: scottinarl@hotmail.com
>Subject: Re: Dropping in the Dizzy
>Date: Sat, 26 Jan 2002 16:09:55 EST
>
>In a message dated 1/26/02 13:00:49 Pacific Standard Time,
>scottinarl@hotmail.com writes:
>
><< Father's working on the TD back home, and he reports that he's having
> trouble getting the distributor to go back in its hole. It goes in fine,
> but it's a tight enough fit that it won't go very far on its own. >>
>
>The TD dizzy has a gear on the end of it and you have to rotate the shaft
>as
>you proceed into the hole.......otherwise, it should drop right in if
>everything is lined up.
>Terry
_________________________________________________________________
MSN Photos is the easiest way to share and print your photos:
http://photos.msn.com/support/worldwide.aspx
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/mg-t
|