mg-t
[Top] [All Lists]

Re: TD Engine

To: tr6@pipeline.com
Subject: Re: TD Engine
From: Bob Howard <mgbob@juno.com>
Date: Mon, 21 Aug 2000 15:00:22 -0400
Ron,
  Somewhere in some of the TD info I have, this was discussed.   "Early"
(whatever that means here) engines had the  double connection at the
head, one connection to the tube to the block and the other to the flex
tube to the gauge.  "Later" had the double connection at the block.  
There was an explanation somewhere, probably in a TSO, that the "later"
position gave a higher reading on the gauge.
  My engine, TD3/22308, was hooked up in the "later" manner.
Bob


On Sun, 20 Aug 2000 11:02:30 -0500 Ronald Olds <tr6@pipeline.com> writes:
> Ok everybody put on their thinking caps.
> 
> I think that I recall some information from a long time ago 
> regarding the
> oil pipe from the block to the head.  My engine has the connection 
> going to
> gauge at the head and I think that someone said that it was better 
> if the
> connection for the gauge line is the block. does anybody recall this 
> or
> just know it from past experience?
> 
> As always, thanks for the help!
> 
> Ron Olds

<Prev in Thread] Current Thread [Next in Thread>