In a message dated 02/06/2003 12:45:50 AM Central Standard Time,
viv@trax.co.za writes:
> I need to know whether a Lucas CFR Type L2 cut-out and fuse box is
> a
> 12 volt unit. If 12 volt, I want to use it on my newly acquired 1929
> Sunbeam 20/60 tourer special which for some unknown reason
> boasts a Lucas RF95 regulator/cut-out as per TC along with a 3 brush
> generator.
>
> I remember that some of you have Lucas catalogues that list this
> stuff.
>
> Thanks in advance
>
> Viv James
> Cape Town
>
Hi Viv,
The Lucas Cat. 1935 lists CFR L2 as Ordering Number 332 037. Neither Sunbeam
or Talbot are listed in the cat.
CFR L2 is crossed reference with CF3/6v/L (6 Volt)
This was used on the following Austin models.
1934/35 7hp.
1932/33 10hp.
As a double check, if the unit is operable, the coil should close with about
7-8 volts I would imagine.
You should be able to get it rewound 12V.
Brian Kelly.
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/cgi-bin/majorcool
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/mg-mmm
/// Send list postings to mg-mmm@autox.team.net
|