mg-mmm
[Top] [All Lists]

RE: J2 wiring harness

To: "'Dwyer'" <jasper@enternet.com.au>, "'MG-MMM'" <mg-mmm@autox.team.net>
Subject: RE: J2 wiring harness
From: "Lew Palmer" <lpalmer@mn.mediaone.net>
Date: Sun, 28 Jan 2001 10:19:30 -0600
In-reply-to: <001f01c08903$33cf3a60$eaa30ad2@jasperenternet.com.au>
Reply-to: "Lew Palmer" <lpalmer@mn.mediaone.net>
Sender: owner-mg-mmm@autox.team.net
The larger diameter conduit (1") covers the main wiring harness from about
the level of the cutout downward. The smaller diameter (3/4") covers the
main battery lead.

Regards,
Lew Palmer

-----Original Message-----
From: owner-mg-mmm@autox.team.net [mailto:owner-mg-mmm@autox.team.net]On
Behalf Of Dwyer
Sent: Sunday, January 28, 2001 2:21 AM
To: MG-MMM
Subject: J2 wiring harness


Gentlemen

On the J2 there is a piece of flex conduit fitted to the wiring loom in
front
of the firewall on the left side low down.

Does anyone have details on length and diameter for this conduit?

We have two bits (one smaller dia and a little shorter than the other)
either
of which might have been fitted to our car when we got it, and it's all too
long ago to remember whether I swapped them at some time.

Regards

Dave Dwyer
British Cars Web: http://www.team.net/sol
MMM list subscription info: http://www.team.net/cgi-bin/majorcool
British Cars Web: http://www.team.net/sol
MMM list subscription info: http://www.team.net/cgi-bin/majorcool

<Prev in Thread] Current Thread [Next in Thread>