[Forwarded due to sending address bounce... - RG]
From: "Lew Palmer" <lpalmer@roundaboutmanor.com>
To: <GRaw505@aol.com>, <mg-mmm@autox.team.net>
Subject: RE: PA Gear Ratios
Date: Tue, 17 Oct 2000 13:17:59 -0500
Yes, yes, yes!
You need to contact Bill Tantau at bill707@aol.com. He is arranging for the
remanufacture of a gear set similar to the R-type and PB for use in the PA
gearbox.
I also notice that you are not a member of the North American MMM Register.
If you have a PA, we would welcome your membership. You may contact Tom
Metcalf at mgmetcalf@aol.com for membership details.
Regards,
Lew Palmer, Registrar
NAMMMR
-----Original Message-----
From: owner-mg-mmm@autox.team.net [mailto:owner-mg-mmm@autox.team.net]On
Behalf Of GRaw505@aol.com
Sent: Tuesday, October 17, 2000 12:06 PM
To: mg-mmm@autox.team.net
Subject: PA Gear Ratios
Has anyone come across a modification of the PA gear box. A couple of years
ago when Pip Bucknell visited while researching Bobby Baird's R-Type he
mentioned a reasonably common mod in Australia. This involved some slight
machining to the gearbox end plate to enable Ford Mexico ratios to be
dropped
in. Any help would be appreciated.
Best Regards
Geoff Rawlings
British Cars Web: http://www.team.net/sol
MMM list subscription info: http://www.team.net/cgi-bin/majorcool
|