land-speed
[Top] [All Lists]

Re: [Land-speed] Inspectors to check engine displacement

To: "Meierle, Michael D (Mike)" <mike.meierle@alcatel-lucent.com>
Subject: Re: [Land-speed] Inspectors to check engine displacement
From: Jon Wennerberg <jonwennerberg@nancyandjon.org>
Date: Fri, 4 Jun 2010 11:43:03 -0400
On Jun 4, 2010, at 11:03 AM, Meierle, Michael D (Mike) wrote:

> Don't have to worry about that until you set a record...:-)
>
> Mike


Well, yes, you're technically correct, Mike -- but I can sure see reasons why
it'd be nice to do it ahead of time - and have the engine sealed.  Like on our
nitrous bike, for instance -- it requires a complete teardown -- take the top
end off -- to measure, thanks to the design of the engine.  And taking the
head off requires darn near pulling the engine out of the bike.  It'd be nice
to do all of that stuff in the friendly environs of a shop (instead of at
Impound), for sure.  I'd insist that the inspector that does the measurement
be a top name (Dan Warner, Tom Evans, etc) and that he not only seal it with a
seal that carries indisputable evidence that he did the sealing -- and of
course, have him enter the information about the process in the logbook with a
signature and date by the entry.  No equivocating allowed.


Jon a/k/a Seldom Seen Slim
_______________________________________________
Land-speed@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>