land-speed
[Top] [All Lists]

Re: [Land-speed] King Pin Bearings

To: drmayf@mayfco.com
Subject: Re: [Land-speed] King Pin Bearings
From: Skip Higginbotham <saltrat@pahrump.com>
Date: Sun, 28 Feb 2010 09:22:52 -0800
Mayf,
The instructions say to machine the king pin bores to 1.062/ 1.063 or 
if you buy their spindles you don't have to do the machining. I will 
do the machining, I think. I will also do some measuring before I get 
the kit. There are several kits available, it looks like. I'll talk 
to them Monday.
Skip




At 08:26 AM 2/28/2010, drmayf wrote:
>Skip, I was about to ask for kit details also.. I see  that  this 
>kit requires the use of speedway part numbered spindles. You going 
>to change from truck to roadster spindles?  Here is the Speedway note..
>
>"They're simple to install and are an easy, cost-effective way to 
>upgrade your 1937-1948 Ford or 1949-1954 Chevy suspension, as well 
>as tubular or I-beam street rod axles using 1949-1954 Chevy spindles.
>
>Use with 91632100 or 91632104 spindles."
>
>mayf
_______________________________________________
Land-speed@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>