land-speed
[Top] [All Lists]

Re: [Land-speed] John Force's Accident

To: "Clay, Dale" <Dale.Clay@mdhelicopters.com>, <Want1937hd@aol.com>,
Subject: Re: [Land-speed] John Force's Accident
From: "Glen Barrett" <speedtimer@beyondbb.com>
Date: Mon, 24 Sep 2007 11:54:33 -0600
We can all speculate and guess. Another theory is that if the tire blew or 
went down it could have rolled under the lower right frame rail and took the 
tubing out. I saw the picture of the cage but it went by on the truck pretty 
fast.
Again just a theory.
Glen
----- Original Message ----- 
From: "Clay, Dale" <Dale.Clay@mdhelicopters.com>
To: "Glen Barrett" <speedtimer@beyondbb.com>; <Want1937hd@aol.com>; 
<drmayf@mayfco.com>; <land-speed@autox.team.net>
Sent: Monday, September 24, 2007 11:37 AM
Subject: RE: [Land-speed] John Force's Accident


One thing I read said that there we "no frame tubes forward of the
seat."  That certainly can't be a good thing!  John is damn lucky!

They're having to tuff season with Eric being killed, Ashley having a
big shunt (uninjured) and now John's accident ...

Dale C.



Subject: Re: [Land-speed] John Force's Accident

Bob
Not sure on the steering wheel. You can bet this will be a high tech
investigation. It's important that the experts review it and let
everyone know
the true story. Nothing I saw looked like the clutch blew. Normally
there
would have been lots of sparks if it was the clutch.
Glen

The information transmitted is intended only for the person or entity to 
which it is addressed and may contain confidential and/or privileged 
material.  Any review, retransmission, dissemination or other use of, or 
taking of any action in reliance upon, this information by persons or 
entities other than the intended recipient or employees of MD Helicopters, 
Inc. is prohibited.   If you received this in error, pleasecontact the 
sender by email and delete the material from any computer.
_______________________________________________

Land-speed mailing list

http://autox.team.net/mailman/listinfo/land-speed

<Prev in Thread] Current Thread [Next in Thread>